Difference between revisions of "SNMP"
m (→Grafana) |
m |
||
Line 80: | Line 80: | ||
Target: scale(8)movingAverage(5min) | Target: scale(8)movingAverage(5min) | ||
95%: nPercentile(#A,95) | 95%: nPercentile(#A,95) | ||
+ | |||
+ | |||
+ | == SNMP Simulator == | ||
+ | http://snmplabs.com/snmpsim/index.html |
Revision as of 04:44, 27 April 2020
Simple Network Management Protocol
Contents
Statistics
- Source: Manager (Poller)
- Destination: Device
- Port: 161 UDP
Traps / Alarms
- Source: Device
- Destination: Manager
- Port: 162 UDP
SNMP v3
Proviso
SNMP community string as used in the gui
&V3,[[Access Mode]]=Auth-MD5,[[Security Name]]=useridtext,[[Context Name]]=,[[Auth Passwd]]=authpwtext
SNMP Communtity string as used in the cli
snmpGet [[OID's]] sys Name.0 -S SNMPCOLLECTORNAME -P 3002 -r 3 -t 2 -c '&V3,[[AccessMode]]=Auth-MD5,[[Security Name]]=useridtext,[[Context Name]]=,[[Auth Passwd]]=authpwtext'
OIDs that use strings as the indexes
jnxSubscriberPortTerminatedCounter.3.112.115.51 = 14825
First int = length Proceeding ints, convert to hex, then hex to ascii in the example above
Length = 3 112 -> 70 -> p 115 -> 73 -> s 51 -> 33 --> 3 index = ps3
netsnmp will translate this when querying ie jnxSubscriberPortTerminatedCounter."ps3"
Net-SNMP
CLI command
./snmpget -v 3 -a MD5 -A 'authpwtext' -l authNoPriv -u useridtext 10.78.252.19 iso.3.6.1.2.1.1.5.0
Nice guide to comparing Juniper CLI to SNMP
- RFC1213 - SNMPv1
- RFC3416 - SNMPv2c
- RFC3411-3415 - SNMPv3
Grafana
Because collectd doesnt us an inventory model - it doesnt appear to keep track or report on missed polls / values. We have to figure this out at the Grafana layer - looking for nulls. Except this isnt easy, we instead have to count how many values we have. This only works for the past 7 days / your raw retention period.
Find how many null values there are (thus missed pollings) - by counting how many values we have
- Series - Choose a metric and using * for the hosts
- Functions
scale(0) offset(1) summarize(1h, sum, true)
95% billing
Will put a line at 95% usage on the graph. Target: scale(8)movingAverage(5min) 95%: nPercentile(#A,95)