Shed suppliers

From neil.tappsville.com
Jump to navigationJump to search

tradequip.co.nz/ Tradequip are suppliers of larger equipment - welders, benders, lathe etc - not high quality


www.topmaq.co.nz/index.aspx same idea as above, larger bits of kit however


www.czjyjc.com/en/news_detail.asp?bigid=2111111283&id=1320 My Lathe / Milling machine


[www.machineryhouse.co.nz/Products?stock Code=L159#] A NZ supplier, same machine however


www.sao.cn/en/index/home.jsp Tracking parcels from china (hongkong post especially)


www.braxtoncarlights.co.nz/ Taiwaneese new + used panels + lights


BOC gasses - Mig welding wire - 5KG 0.6mm = $77.61 + GST


Engine Balancing

Collier Motor Engineers 06 368 0000

91A Cambridge Street Levin 5510



HRV Replacement Filters - (HRV want $200 a filter)

Kent Filter Services

1A Regent St

Petone

ph 5769373 or 0800-536-873

- replacements from filtercorp.biz (NZ Company) $70 inc + Freight. http://filtercorp.biz/home-ventilation.html

--- HRV replace filter red flashing light reset


  1. 1. Turn off control panel using the POWER button
  1. 2. Hold down arrow pointing down for 8 seconds until a 02 comes up where the roof temperature should be (a 01 comes up first but keep holding until the 01 changes to a 02 - don't let go when you see 01). Below the 02 will be another number.
  1. 3. Increase the 02 to 22 using the up arrow button (not holding it down, short continuous pushes).
  1. 4. Below the 22 you will see a 0. Increase the 0 by pressing the power button until you go up to 5. (mine said 50)
  1. 5. Press the FUNC button to save your settings & take you back to the main screen.
  1. 6. You will now see that the filter light has switched off

Shipping from the US to NZ - prezoom




Serving manual for fisher and pakel washing machines www.angelsnz.net/ZL3SV/misc/F&P%20Service%20manual%20517735.pdf


NPT Pipe thread and thread sizes mdmetric.com/tech/thddat19.htm



Bosch Guide Rails

Rails are made for/with Mafell so there is perfect cross compatibility between Bosch and Mafell Tracks and Track Saws

Coreless Saws:

  • GKS 18v-57 - works with 'old' guiderail system (FSN 70, FSN 140)
  • GKS 18v-57-g - Works with the 2019+ FSN Guiderail system


  • 800, 1100, 1600 'fsn-1600' ($203NZD), 2100, 3100
  • Bag - 1650 'fsn-bag'
  • Clamps - 2 'fsn-szw-g-clamps'